Stove & Range Repair in Greenville — Book a Visit Today

A gas burner that clicks and never lights. A flame that runs yellow and lazy. An electric coil that heats on high only. A surface control that stays hot after you turn the knob. Each symptom has its own path — igniter, orifice, switch, or wiring. We diagnose one burner at a time in Greenville kitchens. Say which burner and what it does. Call us or start the quote form.

Real person answers
Open 7 days
Written quotes

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Stove & Range Repair technician in Greenville, AL

Common stove & range faults in Greenville homes

"The burner clicks and clicks but never lights" Spark module, cracked igniter ceramic, or a clogged burner port — often moisture in the switch
"My cookies burn on the bottom every time" Oven temperature calibration, failing sensor, or a bake element heating unevenly
"The oven says preheated but it's barely warm" Oven sensor drift, weak igniter not reaching gas-valve current, or open bake element
"One coil stays glowing red no matter the dial" Welded contacts inside the infinite switch, or a shorted element
"Glass top burner heats, then quits, then heats" Cycling on thermal limit — often a failing radiant element or loose terminal connection

Greenville coverage

We cover Greenville in 36032 and 36037, plus nearby Luverne, Evergreen, Andalusia, and Troy.

Other repairs we do in Greenville

All stove & range repair → · All Greenville services →

Stove & Range Repair in Greenville — quick answers

How do you tell a bad igniter from a bad gas valve?

We measure current draw while the igniter glows. A weak igniter glows but never pulls enough amps to open the valve, so no gas arrives. That reading separates the two parts instead of guessing and replacing both.

My oven is off by 50 degrees. Is that repairable?

Usually, yes. Many ranges allow a calibration offset through the control panel. If the drift is larger or wanders, we test the oven sensor's resistance cold and hot, since a drifting sensor feeds bad numbers to the board.

Do you work on gas, electric, and induction ranges?

All three. Gas work involves igniters, valves, and burner assemblies. Electric means elements and infinite switches. Induction leans on coils, inverter boards, and cooling fans. We diagnose each one differently, since the failure families barely overlap.

Should I keep using a range with one dead burner?

Depends on the symptom. A dead electric coil is inconvenient, not dangerous. Clicking igniters, a gas smell, or a burner that lights late means unburned gas is collecting. Shut it off and call us instead of working around it.

Can you come out if I already had someone look at it?

Yes. Second opinions are a normal part of our work. Tell us what was tested and what part was suggested, and we will run our own checks before anything gets replaced.

How it works

Step 1
Describe the symptom
Tell us what you hear, smell, or see. Grinding? Puddle? Blinking code? Small details narrow the list of likely causes before we ever pull the machine away from the wall.
Step 2
We examine the machine
A technician runs through a checklist: power, controls, sensors, motors, seals, drainage. We test instead of guessing, then walk you through the actual fault and your repair options.
Step 3
You choose the treatment
Some faults are worth fixing today. Others mean the appliance is near the end. We tell you which is which, then complete the repair once you say go.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

We think like diagnosticiansSwapping parts until something works costs you time. We trace the symptom back to its cause, confirm it with a test, and repair the thing that actually failed instead of the thing that looked suspicious.
Second opinions are fine by usSomeone already told you the compressor is done, or the control board is fried? Bring us in to check. We'll do our own examination and tell you honestly whether that diagnosis holds up.
Brand-independent serviceWe are an independent repair company working on refrigerators, washers, dryers, dishwashers, ovens, ranges, and freezers from all major brands. No brand steers our recommendation toward replacement over repair.
Straight talk on repair or replaceNot every appliance deserves a rescue. If the numbers and the condition point toward a new unit, we say so. You get facts about your machine, not pressure to book work.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.